Smart Cookies

The Water Delivery Company receives the same question time and time again and in response to that Id like to use these to give some simple instructions to the most often . One of the basic things that seem to arise when someone gets a cooler for the first time is ‘How Do I the Drip Reservoir?’.Eventually the drip tray of the water coolers will flow over and if you don’t drain it then you’ll end up with water on the floor – spoiling the carpet or potentially destroying a wooden or laminate floor – so keeping on top of the water drip tray is essential. Another glitch that can arise from not emptying the drip tray is the build up of algae and bacteria – the drip tray is unsanitary and it looks ugly. So to start – take off any grill which may sit on top of your drip reservoir. Many water coolers have this and they are there just to support the cup as you pour water. With a little firm pressure the drip trays can easily unclip allowing the grill to be removed. Having removed the grill you’ll have a firmer grip on the drip reservoir itself. Again using firm pressure draw the drip reservoir towards you and you’ll find it unclips. Empty out any water into a bucket or sink. Give the inside of the drip reservoir a wipe with a cleaning cloth and you may like to use a little gentle cleaning fluid or detergent at this stage just to totally disinfect the drip reservoir and optimise its hygiene level. Once the drip tray is drained you can simply clip it back into its home using firm pressure. You’ll feel the click as it clips back into home. To coplete the process replace the grill if the reservoir has one and you’re ready to go!